Jewelry Box Types and Inserts: A Guide for Small Brands
Updated · Vorex Packaging
Most small jewelry brands choose from five box types (two-piece, magnetic, drawer, kraft tuck, window) and match the insert to the piece: a slot for rings, a pierced card for earrings, a notched card for necklaces, a cushion for bangles, foam for sets. Our listed 3.5 x 3.5 x 1.5 in paperboard jewelry box is $1.39 (sale, regular $5.59) per printed piece.
The short answer
Most small jewelry brands choose from five box types (two-piece, magnetic, drawer, kraft tuck and window) and then pick the insert by the piece: a slot for rings, a pierced card for earrings, a notched card for necklaces, a cushion for bangles and a foam cavity for sets. Start with one box family in two or three sizes. Our listed paperboard jewelry box (3.5 x 3.5 x 1.5 in) is $1.39 (sale, regular $5.59) for one printed piece and our listed 9 x 7 x 3 in rigid box is $31.49 (sale, regular $52.49), so you can test a box with your own pieces before a run. The full range is on jewelry and watch packaging.
Which box types do small jewelry brands use?
| Box type | How it feels | Good for | Our listed example (1 printed piece) |
|---|---|---|---|
| Two-piece paperboard | Light, clean, lid lifts off | Fashion and handmade jewelry, online orders | Ring box 2.5 x 2.5 x 2 in: $3.29 (sale, regular $5.59); earring box 2 x 2 x 1 in: $3.29 (sale, regular $5.59); necklace box 7 x 2 x 1 in: $3.29 (sale, regular $5.59); bracelet box 3.5 x 3.5 x 1.5 in: $3.29 (sale, regular $5.59) |
| Tuck end paperboard | Folds flat, very light | Market stalls, high-volume online shops | Cardboard jewelry box 3 x 3 x 1.5 in: $3.29 (sale, regular $5.59) |
| Rigid two-piece | Heavy, solid, kept after use | Fine jewelry, watches, gifts | Watch box 4 x 4 x 3 in with cushion: $31.49 (sale, regular $52.49) |
| Rigid magnetic | Opens like a book, snaps shut | Engagement, bridal and premium sets | Magnetic gift box 6 x 6 x 3 in: $31.49 (sale, regular $52.49) |
| Rigid drawer | Tray slides out of a sleeve | Gift sets, stacking collections | Rigid drawer box 6 x 4 x 2 in: $12.99 (sale, regular $52.49) |
Kraft jewelry boxes and window boxes are made to your size and quoted. The paperboard boxes above are 18pt SBS paperboard printed full colour outside; the rigid ones are chipboard wrapped in printed paper.
Which insert holds which piece?
The insert does most of the protective work and is the first thing a customer sees when the lid comes off.
- Rings: a slotted insert holds the band upright so the stone faces up. A double slot suits wedding band pairs.
- Earrings: a pierced card for studs, a slotted pad or hook card for hoops and drops. Both keep a pair side by side, which matters because one lost earring ruins the sale.
- Necklaces and pendants: a card or pad with notches for the clasp, so the chain lies in an even curve and the pendant sits in the centre.
- Bracelets and bangles: a cushion the bangle wraps around, a slot that holds a cuff open, or a flat pad for chains and beads.
- Sets and heavy pieces: a foam insert with a cavity cut for each item, or a combined card for a necklace and matching earrings.
Materials for each are compared in our custom box inserts guide.
Paperboard or rigid: how do you decide?
- Price of the piece. A $1.39 printed box is easy to justify on a $30 pair of earrings; a $31.49 rigid box fits fine jewelry, bridal pieces and gifts where the box is kept.
- How it travels. Paperboard boxes are light and fit small mailers. Rigid boxes arrive assembled and need more storage space.
- Where it is opened. If the box is opened in front of someone (a proposal, a gift), rigid is worth it. If it is opened at a desk after delivery, a well-printed paperboard box with a good insert does the job.
Rigid pricing is explained in how much custom rigid boxes cost, and the rigid box vs folding carton page compares the two builds.
How do you size a jewelry box?
- Lay the piece on the insert as it should be displayed: ring in a slot, chain in a curve, earrings side by side.
- Measure the length and width that takes, then add a margin so the insert edge is not tight against the piece.
- Measure the tallest point (a ring head, a pendant, a bangle on its cushion) and add depth for the insert itself.
- Group your range into two or three sizes that cover most pieces, so one box family looks consistent.
The box size calculator turns those measurements into inside dimensions. Then order one printed piece of each size and test it with real jewelry.
How should a jewelry box carry your brand?
- One mark on the lid. A foil-stamped or embossed logo reads as more premium than a busy pattern on a small box.
- Logo on the insert card, where it sits right above the piece at the moment of opening.
- Print inside the lid for a coloured reveal.
- Kraft boxes: one colour or foil reads well on brown board; add a printed belly band or sticker seal for colour.
- A care card with cleaning tips and your shop link turns the box into a repeat-order prompt.
What can you print about the metal?
Words on a box or card are marketing, and the FTC's Jewelry Guides cover them. Section 23.0 says the guides "apply to claims and representations about industry products included in labeling, advertising, promotional materials, and all other forms of marketing, whether asserted directly or by implication, through words, symbols, emblems, logos, illustrations, depictions, product brand names, or through any other means." Section 23.5 lists as a misrepresentation the "use of the words 'solid silver,' 'Sterling Silver,' 'Sterling,' or the abbreviation 'Ster.' to mark, describe, or otherwise represent all or part of an industry product unless it is at least 925/1,000ths pure silver." So if one box design is used for both sterling and plated pieces, keep metal claims off the box and put them on a card or tag per piece.
How do you keep silver pieces bright in the box?
Wikipedia's entry on tarnish notes that "silver needs hydrogen sulfide to tarnish, although it may tarnish with oxygen over time." A closed box limits air around the piece; many sellers also place silver in a small sealed bag inside the box. We make the box and insert; ask us about insert materials, but we do not claim an anti-tarnish lining.
For mailers, padding and how to stop tangles in transit, see how to package jewelry for shipping.
A starter set for a small jewelry brand
- One paperboard two-piece box family in two or three sizes, each with the right insert.
- One rigid magnetic or two-piece box for premium pieces and gifts.
- A printed care card and a sticker seal.
There is no minimum order quantity: order 1 piece or 10,000. Every order includes free digital design and dieline and a digital proof before production. Send your piece sizes and get a quote.
Box sizes in this guide
Each size has its own page with the box styles and products at that size, a dieline and a quote form with the size filled in.
- 3.5 x 3.5 x 1.5 in boxes
- 9 x 7 x 3 in boxes
- 2.5 x 2.5 x 2 in boxes
- 2 x 2 x 1 in boxes
- 7 x 2 x 1 in boxes
- 3 x 3 x 1.5 in boxes
- 4 x 4 x 3 in boxes
- 6 x 6 x 3 in boxes
- 6 x 4 x 2 in boxes
Sources
- Vorex Packaging jewelry product pages, listed sizes and single-piece prices, checked 3 Nov 2026.
- eCFR, FTC Jewelry Guides, 16 CFR 23.0 Scope and application and 16 CFR 23.5 Misrepresentation as to silver content, read 3 Nov 2026.
- Wikipedia, "Tarnish", read 3 Nov 2026.









