Shirt Box Sizes: How to Pick a Box for T-Shirts, Dress Shirts and Gift Sets
Updated · Vorex Packaging
There is no single standard shirt box size: size the box to the shirt folded the way you pack it, plus room for tissue. Measure the folded shirt's length, width and thickness, add a little clearance and anything that sits on top. Our listed custom shirt box is 14 x 10 x 2 in (about 35.6 x 25.4 x 5.1 cm), a two-piece paperboard box; smaller folds suit our 12 x 10 x 2 in apparel box, and other sizes are made to your measurements.
The short answer
There is no single standard shirt box size: a shirt box is sized to the folded garment, so measure your shirt the way you fold it and add room for tissue. As a starting point, our listed custom shirt box is 14 x 10 x 2 in (about 35.6 x 25.4 x 5.1 cm), a two-piece lid and base box in SBS paperboard printed full colour, available as a 250 pack, a 500 pack and a single printed box to check the fit. Smaller folds suit our 12 x 10 x 2 in apparel box; anything else is made to your measurements.
Why shirt box sizes vary
A shirt box holds a folded shirt, and folds are not standard. A tailored dress shirt folded around a backing card, a heavyweight hoodie, a slim kids' tee and a sports jersey all end up with different footprints and thicknesses. Retail stores often keep one generic gift box size for everything, which is why a shirt can slide around in it or be squashed at the corners. When the box carries your logo, it is worth sizing it to your own fold so the garment comes out looking the way it went in.
The two numbers that matter most are the footprint (length and width of the folded shirt) and the depth (how thick the fold is, plus tissue and any card). Shirt boxes are wide and shallow on purpose: a depth of around 2 in is typical for one folded shirt in our listed sizes, while a gift set or a thick knit needs more.
How to measure a folded shirt for a box
- Fold it the way you will pack it. Use your real fold, with the backing card or tissue you plan to use. If you sell several sizes, fold the largest one (for example XXL) and size the box to that.
- Measure length and width of the folded shirt at its widest points, including collar points and buttons.
- Measure thickness by laying a ruler or a flat book on top and measuring the height without pressing down.
- Add a little room on each side for tissue and for fingers to lift the shirt out, and add the thickness of anything that goes on top: a care card, a hang tag, a thank-you note.
- Write the inside size as L x W x D and send it with the quote request. Our guide on how to measure a box explains inside and outside dimensions.
Our listed sizes for shirts and apparel
| Box | Inside size (in) | About (cm) | What it suits |
|---|---|---|---|
| Shirt box, two-piece | 14 x 10 x 2 | 35.6 x 25.4 x 5.1 | A folded adult shirt or tee with tissue. Listed as a 250 pack, 500 pack and single piece. |
| Apparel box, two-piece | 12 x 10 x 2 | 30.5 x 25.4 x 5.1 | Smaller folds: kids' clothing, tees folded tighter, scarves. Single printed box to test. |
| Luxury apparel box, rigid | 8 x 6 x 3 | 20.3 x 15.2 x 7.6 | Accessories and small premium pieces: ties rolled, socks, silk squares. Single piece. |
| Apparel pillow box | 12 x 6 x 2 | 30.5 x 15.2 x 5.1 | Counter and boutique pick-up for small soft items. Single piece. |
| Poly mailer | 10 x 12 (flat) | 25.4 x 30.5 | Shipping tees and soft goods that do not need a box. 500 pack. |
| Your fold + tissue | made to order | - | Dress shirts on a card, hoodies, jerseys, gift sets. |
Inches convert to centimetres at 1 in = 2.54 cm. You can send us your measurements in either unit.
T-shirts, dress shirts, hoodies and jerseys
- T-shirts: fold to a consistent rectangle; most adult tees fit our 14 x 10 x 2 in box with tissue, and tight folds fit the 12 x 10 x 2 in apparel box. Measure one first.
- Dress shirts: they are usually folded around a backing card, which sets the footprint. Measure the card plus collar, and keep the depth shallow so the shirt cannot slide and crease.
- Hoodies and knitwear: the fold is much thicker. Expect to need more depth than a tee box gives; measure the folded thickness without pressing.
- Sports jerseys: mesh and printed numbers fold differently from cotton tees, and fans keep the box, so fold the jersey to show the crest or number and size the box to that fold.
Gift sets and holiday shirt boxes
A shirt with a tie, socks or a card needs either a deeper box or an insert that holds each piece. Measure the set laid out the way you want it to be seen when the lid comes off. For premium sets, a rigid box with a lift-off or magnetic lid feels heavier and keeps its shape; our rigid box vs folding carton comparison explains the difference, and the guide to custom box inserts covers card and foam options. For the gift season, see our Christmas packaging range.
Shirt box or mailer: the shipping question
A two-piece paperboard shirt box is a retail and gift box. It is light and looks good, but it is not built to travel through a courier network on its own. If you ship it, put it inside an outer mailer or carton. If the box itself has to ship, a corrugated mailer box is the stronger choice. For plain soft goods, a printed poly mailer is lighter still. Our post on how to package clothing for shipping walks through that choice step by step.
What to print and add inside
The lid is the billboard: put the logo there. Use the inside lid for a short message or pattern. Branded tissue paper (our listed sheet is 20 x 30 in), a sticker seal and a hang tag or care card on top of the fold finish the look.
Test one box before the full run
Order one single printed shirt box (or ask for a sample of your custom size), fold your largest garment, pack it with tissue and anything else that goes in, and close the lid. If the lid bows, the box needs more depth; if the shirt slides, it needs a smaller footprint. Then request a quote with your final size, quantity and artwork. Browse the full apparel and fashion packaging range for other styles.
Box sizes in this guide
Each size has its own page with the box styles and products at that size, a dieline and a quote form with the size filled in.









